🚀 Fuel Your Adventure with Precision!
The AUTOKAY68V-8A360-00-00 Fuel Injector Flow Matched INP-771 CDH-210 is a high-performance set of 4 fuel injectors designed for Yamaha Outboard 115 HP and compatible with various models including Chevrolet Tracker and Mitsubishi Eclipse. Made from durable stainless steel and brass, these injectors ensure optimal fuel flow and longevity, making them a reliable choice for automotive enthusiasts.
Material | Stainless Steel, Brass |
Brand | AUTOKAY |
Exterior Finish | Stainless Steel or Brass |
Inlet Connection Type | Barb |
Outlet Connection Type | Barb |
Specification Met | oe |
Manufacturer | AUTOKAY |
UPC | 600984977871 |
Item Weight | 7.2 ounces |
Package Dimensions | 4.09 x 3.94 x 1.5 inches |
Item model number | 68V-8A360-00-00 |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | CDH-210 |
R**L
Fit my Yamaha 2003 F115 four stroke outboard great
I used these injectors in two F115 Yamaha outboards with great results on both engines. one engine has 10 hours run time on it now and still working well.
A**N
excellent product.
has 1 injector that didn't work but replacement was sent quickly. Fixed my problem.
C**R
perfect for my yamaha 115 outboard
I bought these to swap injectors in my yamaha 115 outboard boat motor after starting to have what I believed was either a failed or clogged fuel injector. These are a direct fit replacement and even have the same exact stampings on them as the OEM injectors I removed. These worked absolutely perfect, were easy to replace, and totally fixed my misfire/low power issue I developed with my boat. All of this for a fraction of the cost of buying these injectors from a yamaha dealer. The only part worth noting is that you need to reuse the little black o-ring that the injector sits on where it goes into the motor. So if you are buying these and swapping them with original, make sure you keep that o-ring and reuse it when installing these new injectors. With the cost of these being so low, I am going to buy another set to have as a spare instead of wasting my time and money sending out the old injectors for a flow test and rebuild.
A**R
One injector was bad
One injector did not work properly when installed.. could be blown through by mouth
B**Y
Works greatly, obviously used, but no big issues
Used these to replace the injectors in my 2006 F115TLR. These injectors were obviously used, but overall in fairly good condition and had the washer and microfilters replaced.One of the injectors supplied had a slight chip in it, but works well (mostly cosmetic, but does highlight that these are used rebuilds).However GREAT value for the money. Resolved my low speed issue (due to only 3 of 4 cylinders firing due to lack of fuel) and boat went from 15 mph WOT at 4200 rpm max to 28 mph WOT at the 6200 rpm cutoff.NOTE: you will NEED to purchase separately the bottom washer as it does not come with it (only the top), or else reuse the ones on your existing injectors. I bought a rebuild kit to get the washer (and thus technically did not need to buy these injectors), but bought these injectors anyway so I'd have a spare set (ie: put in these newer ones, rebuild the old and use those for spares).
C**S
Great injector
Update, ran the engine at the lake on 9/4/20 Engine performed flawlessly at all ranges of speed. As of 6/22 still working perfectly with over 225hrs on them. Would recommend these and would buy them again!!These injectors are identical to OEM Yamaha. These fit my 2005 Yamaha 115TXR. My local Yamaha dealer wanted over 300.00 for the OEM injectors. Changing them was very easy and the fit was perfect. I didn’t give 5 stars because they did not come with the o-ring that goes on the end of the injector that goes in the intake manifold. I didn’t want to, but I used the old old oring from the original injector. No leaks, engine seems to idle much better. Will have to fully test at the lake, so far I would buy again.
B**D
O rings
Whatch out for no inner O rings, finding a set with o rings might be cheaper.
J**M
Perfect fit and worked great
My Yamaha injectors clogged due to ethanol break down in fuel. These fit perfectly and worked great.
A**R
Works like oem
Good fit and identical to the OEM unit on a 2011 Yamaha F115 works great!
G**.
Perfect fit for my Yamaha F115..
I was not sure if they would fit my F115 and afraid that it would not run properly but i was amazed when i ran my boat after installation.I now get full 6000 rpm and gained 8 mph.It was cheaper for me to buy the new one’s compared to getting the original one’s cleaned and calibrated.They are really indentical(CDH210) and even the same color.I will most likely buy a spare set(not worth fixing the original one’s)i am very pleased with my purchase.The only setback is that seals(engine block side) are not included but o-rings are so i used my original seals.The pic if of my original one’s.Great buy..
N**S
Nice price
Good bang for your buck considering what one OEM injector costs.
J**G
Very good deal
came in the mail installed them and they work as they should.
Z**N
Accurate replacements - Good deal
Product looked right, functioned well.
Trustpilot
1 week ago
2 months ago