Fyre Flys 8 Piece White LED Interior Lights for 2016-2022 Toyota RAV4 Super Bright 6000K 3014 Series SMD Package Kit and Install Tool

I am the LEAST skilled at DIY projects and these were pretty easy to replace. I found a couple of YT videos that helped. I worried about breaking plastic tabs but everything was good. The finished result was what I hoped for - very clean, bright light. Total project time was maybe 20-30 minutes. Well worth the time and money.

(This was on a 2021 Rav4 XLE Premium hybrid) These are brighter than stock overall, but not blinding. I wanted lights I could turn on while driving at night and not be distracted, but actually see in the nooks and crannies at night, unlike the horrible lights that come stock. These are about as bright as the stock vanity mirror lights, which are the brightest interior lights, only a clean white. The other stock lights were dimmer, and these are a nice improvement. And the color is SO much better. You might want a little brighter cargo light, but the dome light shines into most of the cargo compartment, too, and this light is still an improvement.Get a cheap set of plastic trim tools or try the included tool, which seems pretty soft but might be adequate. Look for a YouTube video for each light, watch it, then pry away. Apparently unless you have the panoramic, not the regular, moonroof, you should be able to pry off just the covers of the map lights, not take out the whole console. I did just the covers and I have the regular moonroof. Pry from the inside edge. They will come out with some effort, sounding like they broke, but won't be broken. For the vanity lights, pry from the left side of each, push the tool straight in pretty deep and you'll push the white plastic tab out of the way, dropping the left half of the cover far enough to switch out the bulb. The dome light should pop right off if you pry the cover just a little. Don't pry under the bead around the cover, just the cover. It should pop off. The cargo light assembly is easy to pry out, but you need to remove the gray plastic cover on the inside. Once you've popped the assembly out, pull the assembly out enough so you won't lose the wire in the hole, and unplug the white plug, Then take a tiny slotted precision screwdriver and scrape down the little plastic nub at the back of the gray cover through the little hole, enough to get the cover past it, push out the tabs on both sides, and pry it off. There's a video by Morozov Automotive that shows this.For all the lights, check that they work before you reinstall the covers. If they don't work, flip them around 180 degrees. Don't forget that the vanity light switch will go off if the visor is moved too far toward the windshield. If for some reason you do break a cover, just get a replacement from your Toyota dealer, but I doubt you will need to if you pay attention. These LEDs will dim on and off just like stock. Don't suffer with those awful dingy, faint orange stock bulbs. Hopefully Toyota will wake up and start putting LEDs in their new cars.

I purchased a 2016 Toyota Rav4 and was very disappointed with the amount of light in the cab at night. I mean.. during winter we are a long ways from the sun up here in MT and its dark you know. Rav4 lights made it feel like a dimly lit dungeon. Anyways... purchased these, came quickly and along with the pry tool needed for install, which is very nice especially if you do not have such tools, but I did, so now I have an extra. Watch a quick video and about 20 minutes later they were installed. Very... Very... Nice. Completely changes the feel of the car. May be a bit overwhelming to some if you are not used to LED lights, but for me it is amazing. Probably my favorite improvement to the car so far. Very white light not yellow which is my preference. I will post pics if I can remember. Awesome, Awesome, Awesome. I will give update on longevity as well when the time comes.

I own a 2020 RAV4. Super easy install. Comes with tool to help prop open to gain access to where fuse is placed. Super bright. Comes with all pieces needed to change front map, driver and passenger front, rear, cargo, and license plate lights. My only recommendation is watch a video on you tube to help with removing the rear and front map area as can be a bit tricky to prop open.

The original Toyota interior lights were not very bright. Too yellowish. These LED interior lights were perfect. I was happy with the brightness. I can see better inside my car at night. I made the right purchase with these.(2021 Rav4 Hybrid)

Work fine, I would say "go ahead". Just a few comments:- Other brands are much brighter.- They do a little blink while (in the process of) being dimmed (positive side they do not make any buzz / humm noise when dimmed, other brands do, happened to me in the past).- For the trunk this seems to be better, but not enough power.- On the license plate they improve the light for the back up camara during night.- Original bulbs fit much tighter than these ones.. I wonder if this will be a problem in the future with year to come of vibration, temperature change, etc.Hope this helps.

My 2019 RAV4 does not have accessible license plate lights. The instruction said there is an access panel, but there isn’t. I’ve read the lights are only totally replaceable, not just the bulb. It looks like you would have to take off the entire inside panel on the rear door to access the fixtures. At least I have a couple of spares. Anyway, all the rest of the bulbs were replaced with only minor effort. Just be sure to follow the instructions so as to not break any of the surroundings. They come with a plastic pry tool to assist. These brighten up everything just great. The original bulbs weren’t bright enough to do anything.

Everything I needed was there. Really appreciate the non marring plastic tool didnt know it came with it, so it sure was a extra pleasant surprise that it did